Printable Heat Transfer Vinyl Pack - 10 Count

How to Apply iCraftVinyl Printable HTV

First you will need to print your image using any standard inkjet printer using the print and cut feature included with your cutter's software. After printing you will place the image with the image facing up on your mat. Then load the printed image into your cutter to cut out your design. Alternatively, you can use scissors or a crafting knife to cut out the image. Remove your cut image from the paper backing carefully. Place your design on your garment and cover with a teflon sheet or parchment paper before pressing with Iron, HeatPress or EasyPress. 

Home Iron:

• Set home iron to the cotton or highest setting. DO NOT use steam
• Use even and heavy pressure
• Press design for 1 minute
• Give design enough time to cool
  
• Remove Teflon sheet or parchment paper covering design

 Heat Press (Recommended):

• Set your heat press temperature to 360° F
• Firmly press your design for 15-20 seconds
• Give design time to cool down
• Remove Teflon sheet or parchment paper covering design

EasyPress

• Set your EasyPress to the proper setting for your project by adjusting the time and temperature using the +/- buttons. Use Cricut’s guide to help you out.
• The orange light indicates your machine is heating up. Once it is green, it is ready to use.
• Preheat your project material. Then apply your design. 
• Place EasyPress on your HTV design and press the Cricut button to start timer. Hold in pace and use pressure until it beeps.
• Flip project material and repeat on the backside of design.

Washing and Drying Instructions for iCraftVinyl Printable HTV:

• Allow your design to set on your garment for 24 hours before washing. HTV needs enough time to cure to ensure it is adhered.
• Turn garment inside out before washing.
• Do not use bleach or fabric softeners. Use a gentle detergent.
• Wash in cold or warm water.
• Dry flat or hang to dry.
• Do not iron directly on to the HTV once applied.